Improve the thermal insulation performance of glass sliding doors
[China Glass Net] Many people are willing to install glass sliding doors indoors, because it has a wide view, does not occupy too much space, and the appearance is also beautiful, but if the glass sliding door insulation performance is not good, it will affect the temperature inside the house. . The glass material itself is easy to produce a "high cold" feeling that is difficult to access. If the insulation performance is worse, the "high cold" distance is stronger. Or in the summer, if the glass sliding door can't isolate the hot air outside, it is ineffective. Therefore, improving the energy-saving performance in terms of heat preservation and heat insulation is a technical problem to be solved in the future. 1. Increasing the thermal insulation performance of the glass sliding door has a great relationship with the frame material. The requirement is that the strength is good, the heat insulation performance is good, and it is easy to manufacture into various shapes, and it is easy to recycle and is beneficial to environmental protection. The frame of the glass sliding door should be made of aluminum alloy broken bridge or aluminum wood composite, and the wooden frame with good quality is also a good choice. 2, the glass used for glass sliding doors should promote the use of double-channel sealing and hollow glass made of polysulfide insulating glass. The insulating glass spacers should adopt continuous angled structure. If the four-corner type is used, at the joint It must be sealed with butyl rubber. Single-channel sealed insulating glass is not available, and insulating glass with silicone structural adhesive for secondary sealing is also undesirable because of their short service life. 3, in addition to always pay attention to the state of the sealing strip on the glass sliding door, in general, the sealing strip is not resistant to aging, it will not take long to have a lot of dust accumulation, it is more difficult to clean, not only looks unsightly, It also has an effect on the sealing of the glass sliding door. The life of the sealing strip is only five years, so it is found that the sealing strip should be replaced in time. In order to improve the insulation and heat insulation performance of the glass sliding door, it is necessary to be durable and durable from the frame material, the glass and all the accessories. Under the premise of convenient use and beautiful appearance, fully consider the heat preservation and heat insulation. performance. The glass sliding door is a whole, and it is necessary to ensure the quality of each part together, and work together to improve the insulation and heat insulation performance of the entire door. Detachable Jacket,Detachable Hood,Detachable Hood Jacket,Removable Hood Jacket Changzhou Xinzhi Chain Information Technology Co.Ltd , https://www.czczxzlkj.com